Information: LG G2 (AT&T) ("d800")
LG G2 (AT&T)
| |
| Codename: | d800 |
|---|---|
| Also known as: | Optimus G2 |
| Vendor: | LG |
| Manufacturer: | LG |
| Release Date: | 2013 September 12 |
| Carrier: | AT&T |
| Type: | phone |
| GSM freq: | 850 900 1800 1900 2100 MHz UMTS/HSPA+ |
| LTE freq: | 850 1900 700 MHz |
| Platform: | Qualcomm Snapdragon 800 MSM8974 |
| CPU: | 2.26 GHz quad-core Qualcomm Krait 400 |
| GPU: | Adreno 330 |
| RAM: | 2GB |
| Weight: | 143 g (5.0 oz) |
| Dimensions: | 138.5 mm (5.45 in) (h) 70.9 mm (2.79 in) (w) 8.9 mm (0.35 in) (d) |
| Screen dimension: | 130 mm (5.2 in) |
| Resolution: | 1920x1080 |
| Screen Density: | 424 ppi |
| Screen Technology: | IPS LCD |
| Internal Storage: | 16GB or 32GB |
| SD Card: | none |
| Bluetooth: | 4.0 |
| Wi-Fi: | 802.11a/b/g/n/ac |
| Main camera: | 13MP, flash: LED |
| Secondary camera: | 2.1MP |
| Power: | Non-removable Li-Pol 3,000 mAh |
| Peripherals: | accelerometer, gyroscope, proximity sensor, digital compass, GPS, magnometer, microphone, NFC |
| CM Support: | 10.2, 11 |
Get CyanogenMod for the G2 (AT&T)
Development channel a.k.a. Nightlies, usually generated every 24 hours, experimental, newest features, unstable! Release channel a.k.a. M-builds or Milestone snapshots, all or nearly all issues resolved, stable for daily use
Installation
How to install CyanogenMod on the G2 (AT&T)
Or build CyanogenMod yourself
Build guide
How to build CyanogenMod for the G2 (AT&T)
- Also, learn more about building CyanogenMod in general.
Source code
| Device | http://www.github.com/cyanogenmod/android_device_lge_d800 |
| Kernel | http://www.github.com/cyanogenmod/android_kernel_lge_msm8974 |
Additional resources
Special boot modes
- Recovery: With the device powered down, hold Volume Down & Power. When the LG logo appears release the buttons and then press them again. Then, press the Power button three times!
- Bootloader: With the device powered down, plug in a USB cable while pressing Volume Up.
Known Issues
To see a list of known issues, or to submit an issue, visit the Known Issues page for the G2 (AT&T).
Find help online
You may find assistance with the G2 (AT&T) on Internet Relay Chat or on the CyanogenMod forums.
Additional Info / Downloads
Files are provided for archival purposes and are not supported by CM. use loki instead of bootloader unlock!
Edit the d800 device template
This wiki has a "master" device template for adjusting settings pertaining specifically to the G2 (AT&T) (learn more). To change these master settings, edit the wiki device template at Template:device_d800.
Helpful Tip
See something wrong on this page? Report it here.
