Information: Samsung Galaxy S Relay 4G ("apexqtmo")
Note: Firmware update notice
CM 10.2 and CM 11 for this device require your radio firmware and bootloader be updated from the stock 4.1 OTA. You will get assert failures in recovery if you do not update the bootloader, and wifi will not function without the radio upgrade. Compatible bootloader and radio (modem) firmware upgrade packages are available here, if needed:
Get CyanogenMod for the Galaxy S Relay 4G
Development channel a.k.a. Nightlies, usually generated every 24 hours, experimental, newest features, unstable! Release channel a.k.a. Milestones or Snapshots, all or nearly all issues resolved, stable for daily use
Or build CyanogenMod yourself
- Also, learn more about building CyanogenMod in general.
Special boot modes
- Recovery: Hold down Vol Up & Home & Power until "RECOVERY BOOTING" is shown, then let go of the buttons.
- Bootloader: Vol Down & Home & Power
- Download: Hold down Vol Down & Home & Power until "Warning!!" screen appears, then press Vol Up to confirm
To see a list of known issues, or to submit an issue, visit the Known Issues page for the Galaxy S Relay 4G.
Find help online
Additional Info / Downloads
Files are provided for archival purposes and are not supported by CM.
[TeamApexQ issue tracker]
Edit the apexqtmo device template
This wiki has a "master" device template for adjusting settings pertaining specifically to the Galaxy S Relay 4G (learn more). To change these master settings, edit the wiki device template at Template:device_apexqtmo.
See something wrong on this page? Click here: Report a Wiki Problem.